Electrical Services in Palm Bay, FL
Safe, licensed electrical work across Palm Bay. From a dead outlet in Port Malabar to a full panel upgrade in Bayside Lakes — every job is done to Florida code.
Wall mounting for all TV sizes — fixed, tilt, and full-motion mounts on drywall or CBS concrete block walls, with cable concealment.
New fans, replacements, and outdoor lanai fans — on existing boxes or with new wiring. CBS concrete ceiling installations included.
Chandeliers, flush mounts, pendants, and vanity bars — old fixtures removed, boxes upgraded, new fixtures hung level and wired to code.
Level 2 and Tesla home charging stations — dedicated 240V circuits, panel load calculations, permits, and code-compliant mounting indoors or out.
Landscape, path, security flood, and soffit lighting — weatherproof, GFCI-protected, and salt-air rated fixtures for Palm Bay's climate.
Rotary, slide, and smart dimmers installed and matched to your LED bulbs — single-pole and 3-way, with neutral-wire checks for older switch boxes.
Ring, Nest, and Wyze video doorbells wired and mounted — transformers upgraded to 16–24V, new wire run to older doors, and CBS-block mounting done right.
Hardwired and sealed 10-year alarms installed in every bedroom and on every level — wireless interconnect, correct placement, no rewiring needed.
Ground-fault protection for kitchens, baths, garages, laundry, and outdoors — including ungrounded two-prong circuits protected without rewiring.
IC-rated, airtight LED downlights and canless wafers — spaced to the room, sealed for hot Florida attics, and matched to a dimmer that won't buzz.
Federal Pacific, Zinsco, and fuse panels assessed and replaced — insurance-driven swaps, 100A to 200A service upgrades, permit and inspection handled.
Dead outlets, loose receptacles, and GFCI replacements — fixed safely and up to Florida code.
Faulty light switches, dimmer installations, and smart switch upgrades handled properly.
Ceiling fans, recessed lighting, pendant lights, and exterior fixtures — installed and wired.
Panel upgrades, two-prong to three-prong conversions, and subpanel additions for older Palm Bay homes.
Dedicated circuits for dryers, EV chargers, ranges, and other high-draw appliances.
The Same Work in Nearby Cities
We publish a dedicated page for each of these jobs in the Brevard County cities we serve, covering the permitting and code details specific to each one.
Why Electrical Work in Palm Bay Demands a Local Expert
Palm Bay's electrical landscape is more complicated than most people realize. The city grew rapidly during the 1960s through 1980s land boom, and a large portion of its housing stock was built during that era with electrical systems that weren't designed for today's demands. Many Port Malabar homes still have 100-amp service panels, two-prong ungrounded outlets, and no GFCI protection in bathrooms or kitchens — all of which are safety liabilities in a modern Florida home.
Florida's climate adds its own complications. Salt air corrosion affects outdoor fixtures and exposed wiring. Humidity causes junction box connections to loosen and corrode faster than in dry climates. Hurricane season demands that exterior lighting and panel components be properly weatherproofed. Doing electrical work right in Palm Bay means accounting for all of it.
We handle electrical repairs and installations that are within the scope of a licensed handyman in Florida — from replacing a dead outlet to installing ceiling fans across an entire home. Every job is done to current Florida code, with safety as the first priority. When a job requires a licensed electrician, we tell you that clearly and won't take on work outside our scope.
Electrical Services We Provide in Palm Bay
Here's the full scope of electrical work we handle for Palm Bay homeowners — all licensed, all to Florida code.
Outlet Repair & Replacement
Dead outlets, loose receptacles, and standard-to-GFCI upgrades in kitchens, bathrooms, garages, and outdoor spaces. Code-required protection where you need it.
Switch Repair & Installation
Standard switches, three-way switches, dimmers, and smart switches. We replace faulty switches and can upgrade to smart-home compatible controls.
Ceiling Fan Installation
Fan installation on existing boxes, box upgrades for heavier fans, and new wiring runs where no box exists. Wall control and remote kit installation included.
Lighting Installation
Recessed can lights, pendant fixtures, under-cabinet lighting, bathroom vanity bars, and exterior security and decorative lighting — wired and installed clean.
Panel & Circuit Upgrades
100A to 200A service upgrades, breaker replacements, double-tapped breaker corrections, and dedicated circuit additions for high-demand appliances.
Appliance & EV Wiring
Dedicated 240V circuits for dryers, ranges, and EV chargers. Properly sized wiring and breakers for the load — done right the first time.
Electrical FAQ — Palm Bay Homeowners Ask
Are older Palm Bay homes safe when it comes to electrical systems?
Many homes in Port Malabar and other older Palm Bay neighborhoods were built before GFCI outlets were required and before modern load demands were anticipated. If your home still has two-prong ungrounded outlets, a 60- or 100-amp panel, or Federal Pacific or Zinsco breakers, it's worth having those evaluated. We can replace outdated outlets, upgrade panels, and add circuits — all to current Florida electrical code.
Do I need a permit for electrical work in Palm Bay?
Minor repairs — replacing a switch, swapping an outlet, installing a ceiling fan on an existing box — generally don't require a permit in Palm Bay. Panel upgrades, new circuit additions, and subpanel installations typically do require a permit pulled by a licensed electrical contractor. We're transparent about permit requirements before any job starts.
How important is GFCI protection in Florida homes?
Extremely important. Florida's humid climate and frequent rain make moisture intrusion a real risk in kitchens, bathrooms, garages, and outdoor spaces. GFCI (Ground Fault Circuit Interrupter) outlets are designed to cut power instantly when a ground fault is detected, preventing serious shock or electrocution. Florida code requires them in all wet locations, and older homes that predate those requirements should be updated for safety.
Can you install ceiling fans throughout my Palm Bay home?
Yes — ceiling fan installation is one of our most requested electrical services in Palm Bay. Florida's heat makes ceiling fans practically essential in every room. We install fans on existing junction boxes, upgrade boxes when needed, and run new wiring where no box exists. We can also install wall controls and smart-home compatible switches.
What's the cost of electrical repairs and installations in Palm Bay?
Outlet or switch replacement typically runs $85–$175 per outlet or switch. Ceiling fan installation (on an existing box) is usually $150–$250. Panel upgrades from 100A to 200A run $1,200–$2,500 depending on the home's configuration. Dedicated circuit additions are typically $350–$700 each. We provide a detailed written estimate before work begins.
Need Electrical Work Done Right in Palm Bay?
Don't risk a DIY electrical fix in a Florida home. Call us for safe, licensed electrical repairs and installations — with a written estimate upfront and a 12-month workmanship warranty on everything we touch.
Call (877) 916-5930 Ready to Get Started?
in Palm Bay
Call us or fill out the form. We respond within 1 hour.